Pages

Showing posts with label les mclean. Show all posts
Showing posts with label les mclean. Show all posts

Saturday 3 January 2015

FADU 2014

The year book is out.

Hopefully this is the start of a new era of year books from the film anddarkroom users forum (FADU). Earlier in the year Ian a member of FADU expressed his desire to have the year book started again and enquired if any of the other members would be interested in taking part. To his surprise there was a ground swell of enthusiasm for it to be reinstated. A boost to its reincarnation was Les Mclean's offer to curate and edit the book on behalf of the members.

This is the first book since Dave Miller the forums owner bowed out of producing the book back in 2012. There have been a number of calls by different members to get it going again but were not able to find anyone who had the time to get it off the ground. One of the main differences is that a number of members have gotten together to form a group to over see the submission process for the year book.

What makes this year book different from others, and the forum for that matter, is it's strict adherence to all pictures being scanned from photographs. Likewise for a picture to be included in the book, each associate was allowed to submit up to four photographs no larger than 8 x 10 in size. To be mailed to the submissions member no later than the end of October. They were then sent on altogether to Les Mclean for editing.

Another good thing about the submission process for the book was any member no matter what his or her level of experience, was invited to take part. I have to add that FADU is a very friendly welcoming forum who's members are always very willing to share their knowledge no matter who or where you are in your analogue journey.
So to the 2014 edition of the year book, i have to say there is a wonderful selection of photographs reproduced in the book. In the end, nineteen FADU supporters provided work for inclusion in the book. Not as diverse as previous years editions but a good number to start things going again. Of the seventy six photograph’s entered forty have been chosen. Representing all genre of photography.


Thanks goes to all the members who helped to make it a reality and a special thanks to Les McLean for taking on the editorial role. I think his involvement gave the project the impetus it needed to make it a reality. 



Wednesday 2 January 2013

Basic split grade printing


Fig 1
Soft test print

A while a go I was on the FADU forum in the articles section reading up on another subject, when I came across an article by Les Mclean on basic split grade printing. I had a quick read and printed a copy off to read again and give it a try. It is suggested that using this method leads to a more finely toned photograph. Is this the case?  And how difficult is it to get right?

 

Before the introduction of Multigrade and varitone papers photographers used to buy individually graded papers. This led to a working method that was tailored to what grade of paper they had on the shelf. To a certain extent I still do this aiming to produce negatives that print well at grade three. Then burning in (more light) or dodging (less light) areas to gain a well balanced final print.

 
After reading the article several more times to get the basics into my head I was ready to give it a try. I chose a negative that  had a very wide range of tones, that would normally require burning in. The negative used was taken  on Agfa APX 100, ISO 100 developed in PMK Pyro. These negs on average print well at about grade two and half.
Fig 2
Hard test print


Split grade printing requires you to produce two test strips. One at grade zero a soft test strip (Fig 1)  and the second at grade five a hard test strip (Fig 2). Quite simple until you put it into practice for the first time! It maybe an idea to produce an idiot list, for a procedure prompter,  to help jog your memory hopefully reducing the mistakes.

 

First of all it is a good idea to start with a fresh print developer as it may take more prints than you expect to arrive at the end result. For this test I used whole sheets of Foma variant 311 gloss RC 10 x 8. Developed in Moersch 6 blue tone. I will also process a print in my usual way as a reference.

 Sequence:


1.           The first test strip should always be the soft one at grade zero which in my case I dialed in to the enlarger head. You can use individual multigrade filters. I have set the enlarging lens to F8 which is what I would normally set.

2.           I have used five second intervals to obtain the right exposure for the soft print (fig 1) If you feel you need to refine the tonal separation then you can do a further test strip of two second intervals. I have kept to the five second test strip to keep things simple.

3.           Once the test strip is processed and preferably dry, under good lighting check the strips. The trick is to look at the bright tones of each segment the one that produces the best bright tones is the one to choose. In this case about 16.9 sec's. The contrast has to be forgotten about it is all about tone. (fig 1) Be careful not to over do it as it can lead to a muddy looking final print.

4.           This is the start of the hard grade test strip (fig 2). Place a new sheet of paper in the easel and expose the whole sheet at grade 0 at your chosen time (16.9 sec). Be careful not to move the easel. I also covered the photographic paper with a piece of black card to protect it from any stray light when I turned on the enlarger, so I can see the dials when adjusting them to grade five. This is where I think using pre set filters has the edge.

5.           Cover a section of the exposed paper as a reference point from which you can see the increase of contrast. Now expose the following sections at  two second increments. (fig 2).

6.           Once the test strip is processed and preferably dry; under good lighting you are looking for the best section of tonality and contrast that will provide you with the image for your taste. In this case I have chosen eleven seconds.

7.           Now you are ready to combine both the times in the one print. Begin with grade 0 the soft settings (the tonal exposure) this should always be done first as it has the most influence on the final out come; then grade 5 the contrast setting. The picture oppsite shows the result. I must admit the outcome is brilliant in more ways than one. It has an unexpected vibrancy that conveys how sunny and warm the day was.

 

The picture below, is my reference print as you can see it requires more work to produce the tones for the wall in the background and sky. I get the sense that this image is lacking in something. A subjective notion that is a very individual interpretation.

 

Conclusion


Les Mclean's article sets the process out in a way that is easy to understand. I have followed it to the letter and the result speaks for itself. When embarking on new processes there is a certain amount of settling in. Once you are past these initial stages you are only two steps away from a finely toned image, that anybody, novices included would be more than pleased with. I think it is a more efficient method of producing prints and in some cases possibly more cost effective. This is only a basic introduction to the use of split grade printing but I can already see that it has advantages over the standard grade print, achieving a better toned image more easily.